BETA Standard by Atelier Z, a leading Japanese bass brand, is now in stock in used condition.
This model is an affordable version of the “Beta,” which was the basis of the signature model.
The ash body and maple fretboard are the steel specs of the 70’s, making it ideal for slapping.
The original JZ-4 pickups and mini-switch are used, and the series/parallel wiring can be switched by switching the mini-switch.
The JZ-4 pickups can reproduce a wide range of sounds, from powerful to wide-range sounds.
The 24 frets cover a wide 2-octave range, and the deep cutaway allows for smooth playing in the high position.
There are some scratches and dents, but there are no noticeable marks.
The neck is slightly twisted, but the frets have been fretted over, so there are no problems with the playing condition.

Item Rank: B+: Some scratches, but no problems in normal use.

Serial number: 304718
Year of manufacture: 2018
Country of manufacture: Japan
Case: Original soft case
Accessories: spec sheet
Weight: 3.86kg
Truss Rod: No problem, rod is 60 degrees to the left and right.
Fretboard Height: No problem, fretboard height is sufficient.
String Height: Bass string side: 2.5mm above 12th fret
String height on treble string side: 2.0mm above 12th fret
Nut width: 40.0mm
Neck thickness near 1st fret: 21.8mm
Neck thickness near 12th fret: 24.3mm
SCALE: 864mm (34″)
RADIUS: 356mm (14″)
Strings in setup: D’Addario EXL165 / .045-.105 set
Repair and maintenance: Cleaning, string change, rod adjustment, octave adjustment, string height adjustment

* Please note that this is a used item and there may be scratches, dents, etc. that are not easily seen in the photos or scratches other than those listed. Please understand this in advance.

* If the truss rod, remaining frets, or string height is indicated, it was measured by our staff at the time of setup and may change due to climate, humidity, or other environmental factors.
The values are intended to be used as a reference at the time of purchase, and we do not guarantee that they will be the same when you receive the instrument.

* This item is a one-of-a-kind item and is listed on multiple malls at the same time, including in-store displays. We try to delete product information as soon as possible, but this is not always in real time.
We apologize in advance if the item is sold out after you place your order.

Specs

Product Rank
B+: Some scratches, but no problem in normal use.

12 months old

Serial No.
304718

Year of manufacture
2018

Country of Manufacture
Japan

Case
Genuine soft case

Accessories
Spec Sheet

Weight
3.86kg

Truss Rod
No problem, rod is fine, checked up to 60 degrees to the left and right.

Fret Remaining
No problem, there is enough fret height

String Height Low String Side
2.5mm above 12th fret

String height on treble string side
2.0mm above the 12th fret

Nut width
40.0mm

Neck thickness near 1st fret
21.8mm

Neck thickness near 12th fret
24.3mm

Scale
864mm (34″)

RADIUS
356mm (14″)

Strings for setup
D’Addario EXL165 / .045-.105 set

Repair and maintenance
Cleaning, string replacement, rod adjustment, octave adjustment, string height adjustment